Hallo Hessi, Ich habe ein bisschen damit herumgespielt und es schließlich geschafft, die neueste Version von Armbian zu knacken. Ich poste unten einen Link, über den ich eine Anleitung geschrieben habe:
https://forum.armbian.com/topic/40975-h ... n-install/
1. Download Multitool
https://users.armbian.com/jock/rk3318/multitool.img.xz
2. Create SD card with Multitool using balenaEtcher
https://etcher.balena.io/#download-etcher
3. Download old Armbian image (Armbian_21.05.0-trunk_Rk3288_focal_current_5.10.27.img.xz) from balbes150
https://mega.nz/folder/j9QSDQSQ#6WpasOl ... e/Sw5nHADY
4. Put image onto SD card, into images folder
5. Put SD card into tvbox, without attached HDMI cable
6. Power on tvbox
7. Wait for blue led blinking, after that connect HDMI cable
8. Create backup (for your own safety)
9. Erase flash
10. Burn downloaded old Armbian image into flash
11. Shutdown
12. Power on tvbox and complete initial setting (its important for emmc resize)
13. Power off tvbox
14. Download or compile (I prefered compile it own) latest Armbian image for Thinkerboard (be careful, must be Thinkerboard with RK3288, not Thinkerboard-2 !!!!)
15. Create SD card with Thinkerboard image (my recommendation is use another SD card)
16. Insert SD card into tvbox
17. Power on tvbox
18. Wait for boot complete
19. Complete initial settings
20. Using lsblk identify correct device address for emmc storage (in my case its mmcblk2p1)
21. Create mount path: sudo mkdir /tmp/emmc
22. Mount emmc into it: sudo mount /dev/mmcblk2p1 /mnt/emmc
23. Paste Thinkerboard files into emmc using rsync: sudo rsync -avx --exclude=/mnt/emmc / /mnt/emmc
24. Power off tvbox
25. Eject SD card
26. Power on tvbox
